- Joined
- Apr 26, 2009
- Messages
- 7,738
- Reaction score
- 54
- Points
- 0
- Location
- Lafayette, IN
- Vehicle Year
- 1983
- Make / Model
- Ford
- Engine Size
- 5.0 HO carbed with an np435 and np208
- Transmission
- Manual
Have a few quetions on this that searching hasnt fully answered. Buddy of mine says he has parts off his old 87 Mustang 5.0 that he is going to give to me, computer, fuel rail, stock 19lb injectors, intake (his brother has an explorer intake setup)?? etc.... Anyways I couldnt find anything on what, if any, other wiring harnesses could plug into the computer and work with it since it is a speed density computer and not a MAF and if a MAF wiring harness could be made to work with it, NON HO wiring harness work from the same years (such as the crown vics) or ones that are SD or one from an f150. I know that the 2.9 harness can be made to work with the non HO 5.0 computer by simpliy splicing in two more injectors but that is a batch fire setup and Im not sure that an HO setup is like that or not.
My truck has everything fuel system wise on it for EFI already, had a 2.3 FI in it at one time, just have to put in a new high pressure pump.
I dont plan on doing any major upgrades either hince why Im not worried about have a SD setup. My 200hp is good enough for me. I just want better mileage and reliablity.
My truck has everything fuel system wise on it for EFI already, had a 2.3 FI in it at one time, just have to put in a new high pressure pump.
I dont plan on doing any major upgrades either hince why Im not worried about have a SD setup. My 200hp is good enough for me. I just want better mileage and reliablity.