• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

2.0L ('83-'88) Vacuum lines


DJonezy13

Member
Firefighter
EMT / Paramedic
Joined
Jun 11, 2024
Messages
5
City
Iowa, USA
Vehicle Year
1987
Transmission
Manual
I've had this truck since I was 16 and finally decided to completely rebuild the engine. I pulled the engine over a year ago and took pictures of where the lines go on the carb. But, have since then lost that phone in the river. Engine is back in and running but poorly and I feel that I've got some lines in the wrong places. The diagram on the front support is still there but reads like Greek when it comes to which port on the carb the line goes to. Does anyone have a picture of the carb with all lines attached correctly? The tech library has the diagram for the 2.3. Mine is a '87 with the 2.0L and 5 speed transmission. I already removed and capped the EGR and smog pump lines
 
Do you want to hook all that back up? I would plug everything and go from there. Hook the PCV valve and the power brake booster up if you have one and see what happens. If it runs better then you can experiment with hooking up the distributor.
 

Attachments

  • 89674vz3L.GIF
    89674vz3L.GIF
    73.9 KB · Views: 87

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top