• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Thinking of a different way...


94_Xploder

Active Member
Joined
Dec 27, 2012
Messages
25
Transmission
Automatic
I have a 94 explorer 4x4 and im going to be lifting it here pretty soon. Im not new to the 4x4 world as i've had a couple RBV's before and some toyotas. What im wanting to do is keep the COG down, in my 92 ranger I had with a 6in skyjacker class 2 on 35's the truck felt really top heavy same in my tacoma that was SAS'd on 37's and I know that with the explorer it has even more weight to the cab so I could see it being worse. What im thinking of doing is getting a set of jeep coils that would lift a RBV around 4in's and then building a set of coil buckets that are 2in's taller then the factory ones and something like the f-250 shock mounts and a set of extended radius arms that way I will have around 2in's of lift and have more droop then one would with a leveling coil spring. Of course id run a long enough shock to take advantage of the travel. Has anyone here heard of someone doing something like this? I'll most likely run a 33x10.5 or a 34x10.50 with locked axles front and rear. I believe that this would be a pretty capable set-up, Any opinions?
 
Huh, My Ranger with the bastard 51/2 lift never has felt top heavy . On 33x12.50x15 no sway bars, still feels ok on the 235x75x15 winters! (rolls a little in the corners). Skyjacker beam brackets ( in the 4" hole), sk136 springs Trailsmasher drop brackets , 2 blocks, add a leaf ,& Belltech extended shackles and Trailsmasher SSV shocks.
 
Huh, My Ranger with the bastard 51/2 lift never has felt top heavy . On 33x12.50x15 no sway bars, still feels ok on the 235x75x15 winters! (rolls a little in the corners). Skyjacker beam brackets ( in the 4" hole), sk136 springs Trailsmasher drop brackets , 2 blocks, add a leaf ,& Belltech extended shackles and Trailsmasher SSV shocks.

Have you ever played in the rocks?
 
My Ranger has a 6" Skyjacker (5" or so actual lift) and has seen plenty of rocks, even the famed Rubicon trail. It does feel a little tippy on off-camber downhills, however it's never threatened to actually go over, though it does tease you by lifting the rear tires on occasion lol.
It's like that because of the nose-heavy weight balance, combined with stiff front springs. My BII with softer springs and more centered weight balance does not exhibit that behavior at all whatsoever.

An Explorer should have a better weight balance than a Ranger also.

If your Ex is a 4-door, I'd look into some 300PPI early Bronco or F-150 springs for the front rather than Jeep springs, due to it being heavier.
 
Last edited:

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top