Hey y'all, I just had my 03 V6 4.0L Ranger taken in for some brake repairs, and they found the PCV elbow collapsed and deteriorated. Rather than paying an extra couple hundred, it seemed like something I could probably do myself for much cheaper.
I've watched some videos and read some of the threads here, but I'm finding the elbow itself seems fine. It was hanging, disconnected from the intake altogether. When I felt around the intake, it looks like there's just an open hole, not the other end this locking mechanism that seems to be connected to the elbow.
I can't find information on what to buy to replace this, and everything I find in my searches seems to pull up the tube itself.
At the end of the month we've gotta take this baby into DEQ so any tips for this process would be super helpful.
Thanks in advance.
I've watched some videos and read some of the threads here, but I'm finding the elbow itself seems fine. It was hanging, disconnected from the intake altogether. When I felt around the intake, it looks like there's just an open hole, not the other end this locking mechanism that seems to be connected to the elbow.
I can't find information on what to buy to replace this, and everything I find in my searches seems to pull up the tube itself.
At the end of the month we've gotta take this baby into DEQ so any tips for this process would be super helpful.
Thanks in advance.
