Need help with rear lighting wiring 1994 Ranger XLT 2.3L manual 2wd

[Kay7Kay7]

Converting to a flatbed.

Purchased Led light bar.
LINKITOM 40 LED Truck Tail Light Bar


wires are: Red, Green, White, Yellow, Black (5 Wires) out of back of lightbar

Installation instructions as follows:

Black- Ground
Black & Red-brake light
Black & Green- Tail/running light
Black & White- Reverse
Black & Yellow- Turn signal light

My Ranger light wires:

Turn- Orange & Black
Reverse- Pink/Black & Black
Red- Green & Black & Black

Does anyone know how to connect.

Thank you

 

[franklin2]

To properly call out the wiring colors, you list the main wire color first, then the stripe second.

Black with a pink stripe is the Ford reverse light

Black is Ford ground

Orange should be Orange with a lightblue stripe. This is the Ford right brake and turn wire.

The Green should be a Lightgreen with a orange stripe or lightgreen/orange. This is the Ford left brake and turn wire

I looked up the lights you bought. They have a separate amber turn bulb. If your truck does not have seperate amber turns in the rear (some rangers did) you will not be able to hook this amber bulb up.