"Mini Me" Low COG B2 Crawler/Jumper Build

[Dugan]

that seems a little stiff for a TTB rig, but I've never seen valving for one in real life. Very curious how it'll work out for you, and filthy knows what they're doing

300/300 was light from what i saw on most builds. Ben went a little softer n valved it for it i believe. Ttb has such a moment that the multiplier is like 1.6-1.7

 

[Dugan]

 

[Dugan]

Ill add in removable mounts later on.

 

[Dugan]

Got it all welded up.

Did some CAD work, Cardboard aided design! Drew a 3" circle as a reference so I could take a picture of this, clean it up and scale it to size in autocad to print on the cnc.

 

[Dugan]

Need to build some sort of fender I guess with that gap.

 

[Dugan]

 

[Dugan]

Got my bumps mounted and started on the Single Swing steering, stretching the axle put the steering box in a prime spot.

After getting the swing steering mocked, I wanted to get rid of that major bend. Im gonna put the drive steering arm behind everything and get it to work and save room.

 

[ryan]

You're all red Xs unfortunately

 

[Dugan]

You're all red Xs unfortunately

Damnit, I forgot to put them in the shared google folder.

Thank you.

 

[Dugan]

https://www.instagram.com/p/BiW21sknK7I/?taken-by=midknightfabrications

I havent posted anything in awhile, been really busy but check out the Instagram I just put some photos up on there!

 

[Dugan]

Its been awhile, going to photo dump in the order they were taken to update this thread.

CNC machine for the win.

 

[Dugan]

My safe way of moving it at the time haha.

Got a Rx7 radiator for free with a built in dual fan setup. So since this rad lays flat, I had to weld up an orifice and weld a neck onto the top.

And then came the trolling. What the b2 is really known for haha.

building my mounts for the rad.

Had to shrink some metal haha.

 

[Dugan]

Boxed in the rear around the coilovers.

Door for my rear fuel hatch.

 

[Dugan]

Cut up a ranger bed to make my filler panels.

And of course i have a dummy fuel door now haha.

Then on to the exo cage

Looking back wish i went into the fender.

 

[Dugan]

Cnc magic.