Kirbys 1991 Ranger Build Up and Solid Axle Swap


1000 percent agree.


but, i dont have a stock powertrain. so running a dana 300 or 205 with a strong box or black box is on my all around list. that way i can keep my 410 gears. its cheaper or close to cheaper than regearing two axles and more options. i can run 31 to 44 inch tires on the road....just dont use overdrive with the big tires... 33-35 is what i usually use for street duty...unless i have military 37s...but 31-33 if i have to tow. the ol idi dont have alot of tow power.

Want to buy my 4 speed atlas? Just need to change the input around...
 
Want to buy my 4 speed atlas? Just need to change the input around...


i would buy a 4 speed atlas for myself ....4500 bux...

i need tires. so a black box with my 205 it is.

if you buy me a set of inner air locks and 4 new 42 in iroks and fresh 16 in wheels, i might could maybe buy you an atlas 4 speed..

the strong box and the 205 isnt too much bigger than the atlas 4 speed....which is nice.


of course...still would like an atlas 4 speed....and a 6r80 or 10r80 with a p400 6.5.
 
I didn’t realize that I didn’t put the final
setup pics on here. I have been driving it since November an I have it some miles on it- both off road and highway.

I got it all installed an the tail shaft seal of the transmission was leaking. So I had to completely remove the transfer case and replace that dumb seal.

Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap


That gave me a chance to take pictures of how tight the shifters are:

Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap


I got the straight shifters and bobs from behemoth, but the shifters were too big to be that close together. They also didn’t have the shift pattern. A guy at my work has a lazer engraver- so he did the shift pattern. Another buddy milled down the shifters for clearance for me.

Kirbys 1991 Ranger Build Up and Solid Axle Swap

Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap


All installed and everything clears.
 
Took the wife's Jeep to Moab last weekend. It did phenomenal. It's kind of silly how we used to build trucks for years that would barely hang on these trails- my wife's Jeep is pretty stock and it did everything we were willing to try. My daughter drove most of the time and I spotted. We just had a day so we did hells revenge. It walked everything (escalator, staircase, tip over, hells gate) with out a flinch. I did not have the moxy to try Mickeys hot tub.
Kirbys 1991 Ranger Build Up and Solid Axle Swap

Kirbys 1991 Ranger Build Up and Solid Axle Swap


I did add some stock Mojave internal triple bypass shocks to the jeep that I got a good deal on. to get them to the right bypass zone for ride height I had to add some shock extensions and 1" spring spacer in the front and 1/2" spring spacer in the rear. Other than that it's stock.

Kirbys 1991 Ranger Build Up and Solid Axle Swap
Kirbys 1991 Ranger Build Up and Solid Axle Swap


I was inspired by @RaceRanger97 over on TRS to install a modern stereo in my ranger. My old Pioneer has had issues since it got hot idling up hunting this year with the defrost on for a half hour. It also seemed like the pioneer needed a reset every 6 months or so because the BT would stop working. This is pioneer cd deck number 3 or so. I like how they function and perform, but they seem to wear out about every year or two. And I would like to add some modern flare to my truck since my wife's Jeep is really nice with those features. Honestly, I would love a touch screen that would play youtube too for those long journeys, but I haven't found one that would mirror my phone.

This is the one RaceRanger installed in his truck that I put on my truck:


For $60 it was worth a shot- it looks cool and the functionality is pretty rad. I have yet to install the backup camera, but the wiring is there.

IMG_0185 2.jpeg
IMG_0186 2.jpeg


But the sound quality is completely awful. I am not even picky, but I can barely get it loud enough to hear over the truck noise. I got a blown kicker speaker, and the rear speakers sound really tin-ie. Like they are only using the tweeters or something. It's too late to return it and I dont know if it has a problem or if it is just garbage. I think I am going to try something else with a bigger screen and keep this one for a spare for my kids Jeep. I put one in her Jeep with similar results.
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

TRS Ranger Sponsors


Product Suggestions

Back
Top