help finding a aftermarket cup holder? 01’ xlt

[mcgee]

Does anyone know of a aftermarket cupholder i can put right here? Or even ideas to DIY one.

 

[Brain75]

A Guide To Center Consoles - The Ranger Station

Ford Bronco II / Ranger / Explorer Center Console Examples 1983-1985 Ford Ranger Center Console 1984-1990 Ford Bronco II & Ford Ranger Center Console 1991-1994 Ford Explorer Center Console 1995-2001 Ford Ranger & Ford Explorer Short Center … Continued

www.therangerstation.com

Almost all the way to the bottom there is a picture of a "Ford Ranger Full Length Tall Center Console" 2004-2009 w/ Pioneer, it is 2 piece and you might see how much of a unicorn that is in the local junkyards, and if the front half will fit/ interfere with the seat position. Looks like you have a 60/40 split bench you will be keeping?

Beyond that it kinda devolves down to a amazon/aliexpress shopping spree.... I know of nothing offhand, but if you find a picture that even half looks like what you want, save the pic and use amazon's/aliexpress's search by photo to hunt that way.

Being a pretty precise size so it doesn't interfere with the seat means it is gonna be a hard hunt, might be a fabricate only. I think I would opt for a little seat belt console thing - buckle it into the middle position and it rides around in the middle like a passenger... need to remove it, unbuckle it and throw it in the bed. Easier to find on aliexpress than amazon.

I chucked my seats and went with explorer seats and a very common 3rd gen ranger center console.

 

[SenorNoob]

I have the console you already have in about that location. It sits right behind my shifters.

 

[mikkelstuff]

I made a similar setup for my 1975 Ford Ranchero which now has bucket seats. I started with the following box from Amazon, about $19:


Prothens Field Ammo Box | Heavy Duty Storage Case | Waterproof Box for Hunting and Shooting | Ammunition Lockable Storage Box | Shotgun Ammo Can Tool Box | Pistol Ammo Storage Box | Rifle Ammo Box

Then removed the handle, cut the top in two parts for storage, and cut a hole in the top for this large storage mug:


JOYTUTUS Large Stable Cup Holder Expander for YETI, Hydro Flask, Hold 18-40 oz Bottles and Mugs, Car Cup Holder Adapter Fit Most Cup Holder

Sorry but too danged cold here to go take a picture of the finished work.

 

[superj]

Why not get the stock cup golder that goes there? Thats what i did and use it all the time

 

[Brain75]

pix superj, cause I haven't seen one and didn't see anything like that which would cover the shifter area and not go between seats in the tech article pictures...

 

[superj]

It attaches to the seats. I meant to grab a pic today and i forgot to