FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Throttle cable mounted… built a little box that bolts to factory mounts.. allows full motion of cable with no bind, nice smooth sweep
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread



The throttle pedal mount
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread



Crossbrace, ¼” clearance
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread
 
Painted box
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Pedal
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


First shot on dash, this was as far as we could get it to go without cutting the steering adjuster hole, and the amount of space we could move it in if we did cut the hole
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

This is where it sits now, we cut the hole, it feeds us toast when were hungry… we have about an 1” more we could go in, were going to box the end in.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


A new tool we picked up today, almost bought two… can’t beat 99.99 for ½” impact
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread
 
We have had some setbacks with parts ordered this last few weeks. We have been waiting this whole week for our billet flexplate to get the trans in so we can finish the exhaust and get the dimensions for our driveshaft we need to order. Well it was suppose to ship Monday (after this company order it from the builder the day he was leaving for vacation) and only take a day, by Thursday morning I called found out it didn’t get shipped. He shipped it out and I got it tonight, it was the wrong freaking one, it was a 6 bolt I need an 8 bolt. So now I have to wait for culhane to get back from vacation and then figure out if we can’t exchange and get it shipped directly to me. So that will probably take another week.

We have been doing little things to complete the front end, like undercoating the glass and cleaning the bumper up and getting it ready for paint. We added a layer to the bedsides to get that rubber look, its sole purpose is to reduce spider cracks from rocks, that is why only portion of hood done. Only things we had left to do was install the new resi seals on the front bypasses to fix the leak and install idler and pitman arm pulley along with belt.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


The pulley’s were another headache, I found a guy www.stuffforyourranger.com (underdogperformance) who made aluminum idler and tensioner pulley’s. You have tried to find someone else with no luck. Four weeks ago I call him give him my credit card and he said it would ship that Friday. Two Fridays go by so on the following Tuesday I call him, tells me he never shipped it because he could not charge my card because he forgot to renew his Quickbooks. Said if I still wanted it to pay paypal or money order, I told him I think about it. Check rock auto it was 20.00 ship to my door and I knew it be here in 3 days max. Call him back because I was willing to pay 10-20 extra for blue billet ones instead of stock. My stipulations were that he ship it out that day with usps priority and get me delivery confirmation email and I would pay him right then and there on paypal. Friday comes along no email, so I email him saying this is bad business and not happy, I get an email later with him agreeing on bad business and a ups link not usps and says a order has been set up waiting for package to be taken to ups. Next Monday arrives still says same thing, email him again asking what’s the deal. He responds he is closing the website because he can’t put the time into it and he will refund me, a day later and 3 more emails finally get refund. So in the end I order from rock auto and got stock ones today and install.

I order a belt a month ago from rock auto; it was not the right size. They do not have a non ac for my car and then I have a smaller alt and larger power steering pulley. I do a string measurement and exchange at a local store costing me as much additional as would have just to order rock auto one, and this one was now to small.

So that has been the crap I have been going through with parts. As it stands right now I need a belt to finish front besides electrical. We cannot work on the underneath of the truck, so I think we’re just going to work on the dash and rest of cab as much as we can and maybe jump on to the things in the rear. I am hoping these issues do not get us to far behind schedule, the transmission is really holding us up…we don’t want to do all the mounting and have to pull it back down, due to its weight so we want all the parts so it goes in until its time for tear down/maintenance.
 
A new tool we picked up today, almost bought two… can’t beat 99.99 for ½” impact

My dad cooked two of those guns in two days......
 
We got the bumper and everything up front assembled for the final time, the grey you see is anti-seize will prevent bolts from freezing up in sleeves and also help with rust. Rust is the main reason we painted everything using Rustoleum paint. Don’t have the big bucks to afford powder coating all the time or the time to boil linseed oil.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Third belt was a charm
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Built some discs to fill the old door wire harness holes, and then since we didn’t want to weld by the paint, we JB welded them in and then use liquid electrical tape to help with rust and seal it
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Today we built a dash mount to that also filled the spot between our fiberglass cowl and made a clean looking dash mount. Instead of using dzus fastener plates welded into our mount, we decided to build our own dzus fastener mount into our dash mount. With just these 4 fasteners the dash is secured nice and rigid. There will be fasteners on the bottom as well as access panels made for the end caps of the dash.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread
 
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

All dzus up, will be adding two more to the center console bars when they are fabricated
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Reglassed the precut holes
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


We got the flexplate last Friday but they sent the wrong one, hoping the new one will be here tonight or tomorrow… got the shifter parts mounted to trans, it is just waiting for the flexplate so it can go in. If it shows up tomo it won't be until late and that means will start on it the following day. Once it does show up your going to see some new bitchin stuff from FAST, like our boxed mounts, our custom built exhaust and more.. enjoy
 
My dad cooked two of those guns in two days......

was he using them for like an automotive shop or constantly using them? how did he cook them? this one is just to be kept in the race truck and used to switch out tire on track... we got air at pit, but just for that im going to keep a breaker bar on truck to in case it does fry or battery dies
 
your getting pretty close, are you going to race the 2012 season?
 
right on, were going to race the VORRA season opener for my Snr, Project, then I am probably going to take some time off, get a real job and link my truck and kingpin beams in the front and race in like 5 years
 
We mounted both pumpers... the old location will be our new mount for the impact most likely
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Fire extinguisher mount
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Built a foot mount on passenger side, going to do a small one on drive's side
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


The flexplate finally came... can get to business tomo.. were a little behind because of this but working hard
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread
 
We got up this morning thinking it be a great day.. first words to my dad was you ready to get back to some real fabricating… Never did I expect what would happen next.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


First ran into a small set back, at least we were smart to check and make sure the two starter bolt holes (the ones with threads in them) were not damage by checking to see if the bolt threaded. Well they both had been heli coiled, and one of the holes was not drilled all the way through and did not have locktite. We could not get the bolt to thread in, so we used a tap and the tap pulled out the heli coil. We thought it was just gunk up at first or they used a std. heli coil in a metric bolt hole. When we got it out learned it was the right heli, but due to the improper installation bolt did not thread in. Went to Autozone bought the 30.00 kit and we were on our way after an hr set back.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


The main reason why it was good we check the holes early is because we planned on installing the trans with the truck still at scrub, because the motor was being held up in the back by a jack, so if we wanted to lift the truck we would have had to strap motor and put wheels back on. So imagine figuring out the bolt would not thread in while your squeeze underneath the truck with a heavy trans balance on a jack. Before we actually decided to tap it we had been threading the bolt in and out with oil trying to clean it out. So props to my dad for thinking ahead. Next we got the torque converter on the (making it much heavier) and lifted it to the back of the truck so we could slide it in from the back.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


About 30 min later and 5 arms we ran into a huge set back. The trans was not pushing on easy with the torque converter in, we had got the two main bolts with the pins in and still needed to push the trans on about an 1/8 and as we went to get the last push so we could put the rest of the bolts in, we heard a pop. The bellhousing had cracked, after getting it apart we learned it was already cracked and we had just snap it off. In the pick the dark spot is were the aluminum had been cracked and dirt and air was getting through. After closer look we notice that were they had done a repair down by the start bolt hole, there was still a crack there.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


We decide to not make the whole day a waste and knock out the last piece we could do in the cab (until trans was in)… we will be offering these as a two piece kit with pop rivets included. You can bolt or screw in or even weld in if you like though. Very low price for a nice little add on to your truck.
FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread

FAST Fabrication 94 b4000 turn into SNORE class 7 race truck build thread


Sad to say won’t be testing at end of July… Mostly due to funds, I was not expecting to have to buy the flexplate at first and now I have to buy a billet bellhousing. Those two things amounted to the cost of my driveshaft I needed to order. So going to set me back a month due to funds and two weeks due to time frame to replace bellhousing/flexplate. Hopefully I will be testing first week or two of September, but no promises, now I know can’t expect things to go smoothly, especially when ordering parts and shipping problems. I will keep you updated and work on other things as well.
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

TRS Ranger Sponsors


Product Suggestions

Back
Top