Escorts 2nd SAS

[dangerranger83]

A short one in the center and longer ones on the ends.

Sent from my SGH-T499 using Tapatalk 2

 

[escort_gts]

Yeah limit straps would be your quickest, and cheapest option.

A short one in the center and longer ones on the ends.

Sent from my SGH-T499 using Tapatalk 2

Well, I'm not to worried about it right now. In the future it will happen, when I get the knuckle swap and hydro assist done.

Right now I am just wanting to get it all back together and driveable...so I think my wheeling is done for the summer.

Sent from my PC36100 using Tapatalk 2

 

[dangerranger83]

I hear you on that. Im putting everything into my swap.

 

[escort_gts]

I need money to get it fixed. Sucks being broke.

Sent from my PC36100 using Tapatalk 2

 

[dangerranger83]

Im broke only because of me wanting to do the swap, other then that I would be fine. Right now Im down to the little things, and there are alot of them

 

[escort_gts]

Well, not much progress update.

This week the plant is shutdown so I had plans to tear the truck apart and fix and repair a lot of problems along with making bumpstops for the front. Had parts made up from GetBent Kustoms for it. Friday afternoon we had one of the biggest thunderstorms I've ever seen. Winds in excess of 100mph knocked out 70% of Fort Wayne, I am one of them. Power is still out. They are estimating it be till Wednesday before its back on.
So that just screws my plans for the week.

Sent from my PC36100 using Tapatalk 2

 

[5speedin2.3]

Well, not much progress update.

This week the plant is shutdown so I had plans to tear the truck apart and fix and repair a lot of problems along with making bumpstops for the front. Had parts made up from GetBent Kustoms for it. Friday afternoon we had one of the biggest thunderstorms I've ever seen. Winds in excess of 100mph knocked out 70% of Fort Wayne, I am one of them. Power is still out. They are estimating it be till Wednesday before its back on.
So that just screws my plans for the week.

Sent from my PC36100 using Tapatalk 2

The power being out would give me an excuse to be in the garage with a wrench in my hand.

 

[escort_gts]

The power being out would give me an excuse to be in the garage with a wrench in my hand.

I need to so some welding. So without electricity its kind of difficult.

Sent from my PC36100 using Tapatalk 2

 

[railman]

I need to so some welding. So without electricity its kind of difficult.

Sent from my PC36100 using Tapatalk 2

why we have generators down here

l8r, John

 

[escort_gts]

why we have generators down here

l8r, John

The generator I have might or might not be big enough to run the welder. So I'm not going to spend a lot of time re-wiring it to be able to run the welder.

Sent from my PC36100 using Tapatalk 2

 

[dangerranger83]

Hmmm...guess should turn my truck into a disaster emergency vehicle, at least for myself.

Or get another ranger for that task.

 

[5speedin2.3]

I need to so some welding. So without electricity its kind of difficult.

Sent from my PC36100 using Tapatalk 2

Get creative with some jumper cables and a few car batteries.

 

[escort_gts]

I finally was able to do something today, made these

Bump stops for the front. Wont install them until next week on my days off.

 

[88_Eddie]

hmmmm, that's a good idea. i just welded mine to the coil bucket

 

[escort_gts]

Been wanting to do this for almost a year, just didnt know if I wanted to keep this ride height.