Chevy Spring Swap

[Beef52751]

I just bought a 86 Ranger tonight, im super stoked, its got a 6 inch lift on the front but only a stock block and a 2" lift block on the rear, it leans back about an inch or 2, so im going to ditch the stacked blocks and go with chevy leaves, my question is will i have to do anything different than the write up in the tech library because i have a reg. cab long bed instead of the ext. short bed in the write up???

Thanks
Beef

 

[Sasquatch_Ryda]

Hmmm should be easier, no rear cab mount in the way of the front spring hanger.

6 inch lift in the front....so the chevy leafs plus the stock block and an extended shackle will get you sitting level again.

 

[Beef52751]

Thanks, thats what i was thinking but wasn't sure. Figured i would ask before i got into it.
Thanks
Beef