Adding Factory Cruise Control to a Plain XLT, what do I need from a donor?

[Lost_My_75_Horse]

Hey all, I’m the original owner of a 1996 CC Ranger XLT, 5 speed, 4.0, with power mirrors, I bought this truck when I was younger and had less money, so I did not get the cruise control or power windows, or 4WD, but I really want Cruise Control. What do I need to Add the “factory” cruise, to my 96. I have the remote mirrors, so that might be a upgraded wiring harness, just like to know what I need, If I can’t do this, then adding factory 4WD is out. But really with 28 MPH, I just love this truck.

 

[sgtsandman]

This might help you some. At least get you going in the right direction until others can chime in: https://www.therangerstation.com/tech/cruise-control-install-93-ranger/

I think there is a post in the How To section up near the top of the forum for later models as well.

 

[Lost_My_75_Horse]

thanks

 

[Dirtman]

 

[sgtsandman]

That won't work. Everything is on the wrong side!

 

[85_Ranger4x4]

It isn't bad on a first gen, it is pretty much standalone.

The newer you get the more integrated it gets.

A 4.0 should really do better than 28mph...