• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

95 ranger dana 30 swap


IMG_0996_zps385d96f0.jpg


Need to get an add a leaf but total swap took about 10-12 hours and that's one trip to the parts store. I'll be happy when it's level
 
Um...are those shackles in the front facing the opposite way they're supposed to?
 
Shackles aren't in the front I put them in te back. Solid mount is in the front just like the rsk on my obs 7.3. It rides smother this way
0126131347.jpg
 
This is what Brinker88 was talking about,

You shackle angle is too far foward.
 
This is how I did it on my obs with a pmf fabrications kit. It had my shackles like that and rode fine and held up just fine.
I see your point but what will I gain if I make my brackets so my shackles are like yours?
 
This is the pmf kit with the front facing shackles
IMG_1002_zps7425dd23.png

Is there a right way or wrong way it's supposed to be?
 
Any one?? I have searched and have found them both ways but I want this to be safe and function properly. If I need to change it I would want to do it now..
 
I think if u want the most flex it should be angled back and it should give it a better ride.
 
Mine rears are angled like that and with no bed it feels like its on solid blocks. I'm not sure about what degree the angle needs to be but for comfort at least you would want it angled out.

Sent from the road while ignoring traffic
 
Ok good info I'll try to get them switched around this weekend
 
Installed king ranch seats I scored off of cl. I cut the brackets off of the seats. I took the brackets off of my 60/40 seats and welded them to the brackets on the king ranch seats. Then just bolted them up in the factory location. The console I had to chop about 5 inche off the front of it to get it to set level. Fit good and the console is snug to the seats.
IMG_1050_zps29ef4414.jpg
 
That is sweet!!!
 
Thanks not bad for 100 cl find!
 
Gotta a better day time pic of the seats today.
IMG_6768_zps579bffca.jpg

IMG_9847_zps14484b36.jpg


My add a leaf got here yesterday hoping to put them in over the weekend. Also hoping to flip my shackle in the front and get them straight
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top