JoshT
10+ Year Member
⭐Supporting Member
💻 TRS Socials
TRS Event Participant
V8 Engine Swap
TRS Banner 2012-2015
- Joined
- Aug 6, 2007
- Messages
- 6,073
- Points
- 2,001
- State - Country
- GA - USA
- Vehicle Year
- 1999
- Vehicle
- Ford Ranger
- Engine
- 5.0L
- Transmission
- Automatic
- Total Drop
- few inches
- Tire Size
- ~30"
Edit: Opening this up to stock beams and 95-97 knuckles as well. A set.of drop springs will do for the project, but I want the better brake options of the later knuckle.
Like the title says, would like to pick up a set of used drop beams for 89-97 suspension to put on the potential first gen drift truck project. Preferably Dream Beams, but will consider any. Has to be 89-97 version with the ball joints mounted in the knuckle, they will be used with 95-97 knuckles for a brake upgrade.
The closer to Middle GA the better. If they are close along my route to the Fall G2G in Fayettfille, WV or can be brought to the G2G, that would be considered as well.
If you have a line on a set at another site, please let me know. I rarely get around to the other Ranger forums and don't even know which ones are still active.
If you're a scammer feel to DM me as well so I can report you straight to the admin.
Like the title says, would like to pick up a set of used drop beams for 89-97 suspension to put on the potential first gen drift truck project. Preferably Dream Beams, but will consider any. Has to be 89-97 version with the ball joints mounted in the knuckle, they will be used with 95-97 knuckles for a brake upgrade.
The closer to Middle GA the better. If they are close along my route to the Fall G2G in Fayettfille, WV or can be brought to the G2G, that would be considered as well.
If you have a line on a set at another site, please let me know. I rarely get around to the other Ranger forums and don't even know which ones are still active.
If you're a scammer feel to DM me as well so I can report you straight to the admin.
Last edited:

