2.3T Swap into a '95 2.3 Ranger


zxtuba

5+ Year Member

Joined
Nov 19, 2017
Messages
1
Points
501
Vehicle Year
1995
Transmission
Manual
Hi folks, joined to post this.

I've got a 1995 2.3L 5 speed Ranger that I'm thinking of swapping in a 2.3T from an '88 TurboCoupe. I've spend my day reading about this swap, and the hurdles I'd have to jump over to make it happen in a 95 Ranger. I have the full harness and computer for the TurboCoupe.

I've been reading about the differences in computers between the two, seeing as 95+ had EEC V whereas the TurboCoupe and 94 and older Rangers had the same computer. I've also read that you can splice in the harness from the 2.3T into the EEC V harness. Now, I realize that splicing in a harness would be a pain in the ass, but would it really be that hard if you have a pinout diagram for both harnesses and a bucket full of butt connectors?

Would it be less a mess to just buy an old Ranger with EEC IV? Would it be possible to run the turboCoupe computer (taking a step backwards in tech) in the Ranger? Swapping out the newer computer for the old?

I have so many questions that I've had a hard time answering by sifting through posts by people who are trying to do the same thing as me.

Thanks!
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

TRS Ranger Sponsors


Product Suggestions

Back
Top