1990 ford ranger 300 swap in progress

[bobbywalter]

Thanks I appreciate it but I’ve still got much to learn I’ve only built 2 exhaust systems and few manifolds this will be my 3rd system lol

he is dead wrong.....you are a solid 13.166 percent more kewlzez at the bare minimum......

he is just trying to get ya to work cheap.....

 

[PetroleumJunkie412]

he is just trying to get ya to work cheap.....

.........you just trashed my biz plan.

 

[bobbywalter]

speedway intake, turbo manifold and aces had me at 2600.....

minimal fab.....hard to beat setup.

 

[bobbywalter]

Ford 300/4.9L Inline 6 Turbo Header- Front Exit

Ford 300/4.9L Inline 6 Turbo Header- Front Exit

www.stainlessheaders.com

OF6227C - 1965-96 Ford Straight-6; 240-300 cid; Offenhauser C Series Intake Manifold; Single-Quad; Square Bore, 4-Barrel

Offenhauser C Series intake manifold for Ford 240-300 cid striaght-6 engines. C Series intake manifolds fill the gap between stock and competition setups for 6-cylinder pickups.

www.classicindustries.com

Killshot 2 Pro EFI System

Killshot 2 Pro EFI: Advanced throttle body EFI with dual-quad support, 1200HP capability, 31x31 tables, boost control & pro tuning.

acesefi.com

well......those prices have risen dramatically. damn....

hell a carb setup....

https://www.jegs.com/i/Offenhauser/750/6019-DPK/10002/-1?gad_source=1&gad_campaignid=17339122447&gbraid=0AAAAAD6OBRHb2gTM486xHGOxiPmsw-jm9&gclid=Cj0KCQjwnIDUBhDrARIsAJDGwSsuLlTc6zoVwZkpUd16fv70sJaG3xx5qmicE2w9ediORKSRwxf_j8QaAg7XEALw_wcB

i guess i would leave the oem setup on with a modified upper with speeduino now.......sheesh.... no fun to be had cheap...

 

[Thatbrokeranger]

he is dead wrong.....you are a solid 13.166 percent more kewlzez at the bare minimum......

he is just trying to get ya to work cheap.....

I respect the hustle lol

 

[Thatbrokeranger]

Ford 300/4.9L Inline 6 Turbo Header- Front Exit

Ford 300/4.9L Inline 6 Turbo Header- Front Exit

www.stainlessheaders.com

OF6227C - 1965-96 Ford Straight-6; 240-300 cid; Offenhauser C Series Intake Manifold; Single-Quad; Square Bore, 4-Barrel

Offenhauser C Series intake manifold for Ford 240-300 cid striaght-6 engines. C Series intake manifolds fill the gap between stock and competition setups for 6-cylinder pickups.

www.classicindustries.com

Killshot 2 Pro EFI System

Killshot 2 Pro EFI: Advanced throttle body EFI with dual-quad support, 1200HP capability, 31x31 tables, boost control & pro tuning.

acesefi.com

well......those prices have risen dramatically. damn....

hell a carb setup....

https://www.jegs.com/i/Offenhauser/750/6019-DPK/10002/-1?gad_source=1&gad_campaignid=17339122447&gbraid=0AAAAAD6OBRHb2gTM486xHGOxiPmsw-jm9&gclid=Cj0KCQjwnIDUBhDrARIsAJDGwSsuLlTc6zoVwZkpUd16fv70sJaG3xx5qmicE2w9ediORKSRwxf_j8QaAg7XEALw_wcB

i guess i would leave the oem setup on with a modified upper with speeduino now.......sheesh.... no fun to be had cheap...

Yeah I’m not buying any of those hahah I prefer to build it as you can’t convince me any of those are worth the money/gains. Just meh. It’s cheaper for me to make what I need na spend thousands when Its just a stock 300 with an hei and 2150 carb hahaha

 

[bobbywalter]

well.....hard to find a carb 300 where i am.....there was a good manifold for 280 for a long time.



so...

i would just box out a efi intake and run my 6.9 turbo with gm injectors and a speeduino.

500 bux and 600 ft pounds. its doable.

 

[Thatbrokeranger]

Ford 300/4.9L Inline 6 Turbo Header- Front Exit

Ford 300/4.9L Inline 6 Turbo Header- Front Exit

www.stainlessheaders.com

OF6227C - 1965-96 Ford Straight-6; 240-300 cid; Offenhauser C Series Intake Manifold; Single-Quad; Square Bore, 4-Barrel

Offenhauser C Series intake manifold for Ford 240-300 cid striaght-6 engines. C Series intake manifolds fill the gap between stock and competition setups for 6-cylinder pickups.

www.classicindustries.com

Killshot 2 Pro EFI System

Killshot 2 Pro EFI: Advanced throttle body EFI with dual-quad support, 1200HP capability, 31x31 tables, boost control & pro tuning.

acesefi.com

well......those prices have risen dramatically. damn....

hell a carb setup....

https://www.jegs.com/i/Offenhauser/750/6019-DPK/10002/-1?gad_source=1&gad_campaignid=17339122447&gbraid=0AAAAAD6OBRHb2gTM486xHGOxiPmsw-jm9&gclid=Cj0KCQjwnIDUBhDrARIsAJDGwSsuLlTc6zoVwZkpUd16fv70sJaG3xx5qmicE2w9ediORKSRwxf_j8QaAg7XEALw_wcB

i guess i would leave the oem setup on with a modified upper with speeduino now.......sheesh.... no fun to be had cheap...

Also I’m not boosting this the engines a 95 but efi stuff was trashed badly in The wreck /rollover. This swap/build isn’t being done with loads of money. I work on it durning my boys nap time and evenings when I can. Ive gotten very far with minimal investment right now and just using recycled parts or hustling parts/trading parts.

 

[bobbywalter]

800 with new pump...

 

[Thatbrokeranger]

well.....hard to find a carb 300 where i am.....there was a good manifold for 280 for a long time.



so...

i would just box out a efi intake and run my 6.9 turbo with gm injectors and a speeduino.

500 bux and 600 ft pounds. its doable.

No boost man swear I gotta yell it until I’m blue in the face on all my post across social media

 

[bobbywalter]

Also I’m not boosting this the engines a 95 but efi stuff was trashed badly in The wreck /rollover. This swap/build isn’t being done with loads of money. I work on it durning my boys nap time and evenings when I can. Ive gotten very far with minimal investment right now and just using recycled parts or hustling parts/trading parts.

i know all about 5 kids and minimal time and money.

 

[bobbywalter]

No boost man swear I gotta yell it until I’m blue in the face on all my post across social media

not 20 pounds..... 8....its goooooood for you.


you have to treat yourself here and there

 

[Thatbrokeranger]

i know all about 5 kids and minimal time and money.

Stay at home dad has its perks but no income sucks sometimes

 

[Thatbrokeranger]

not 20 pounds..... 8....its goooooood for you.


you have to treat yourself here and there

Nope 0 psi lol I don’t want the money snd process that comes with boost. Been there done that lol

 

[bobbywalter]

Nope 0 psi lol I don’t want the money snd process that comes with boost. Been there done that lol

well... your a wise man indeed then.

n/a is definitely fine. i live with being slow....and thrifty.