Hey guys! I have an issue with the AT shift cable on my Ranger consisting of it being shortened by the truck having a 3” body lift. The plastic tabs holding it in the bracket on the side of the trans have worn down and won’t hold anymore. Temporarily I have a couple hose clamps holding it in place. The question I have is are there any other models that have a longer cable with the same ends? Thanks in advance!!!!
04 Ranger 4x4 AT Shift Cable Issue
- Thread starter CaptainChromeBeard
- Start date
- Joined
- Sep 13, 2020
- Messages
- 768
- Points
- 601
- City
- Texas
- Vehicle Year
- 2007
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- Leveled out +1 inch at the front
- Tire Size
- 33 x 12.5 x R15 Baja Boss MT
- My credo
- For every door that closes another one opens for you to lead others always when you least expect it!
Hey CCB,
Custom cables can be made with a brass rod of the correct diameter. Drill & solder to attach the cable. The shroud can be trimmed with a dremil. Also at marine shops.... they will have a collection of end pieces because they make custom cables on the spot. Good luck! The good thing about this place is that it's ok to add a picture or two. Hope all turns out well.-
Doug
Custom cables can be made with a brass rod of the correct diameter. Drill & solder to attach the cable. The shroud can be trimmed with a dremil. Also at marine shops.... they will have a collection of end pieces because they make custom cables on the spot. Good luck! The good thing about this place is that it's ok to add a picture or two. Hope all turns out well.-
Doug
Sponsored Ad
TRS Events & Gatherings
Latest posts
-
Are 89 rad supports compatible with an 88?- Latest: 85_Ranger4x4
-
-
-
TRS Event 2026 Fall Colors Campout- Latest: Li'l Work Truck
-
-
-
-
-
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
