reed b.
Member
- Joined
- Aug 2, 2020
- Messages
- 48
- Reaction score
- 7
- Points
- 8
- Location
- CA
- Vehicle Year
- 1988
- Make / Model
- ford ranger
- Transmission
- Manual
friends.. a newbie online here but less so since i've been getting help for a couple of years in these very helpful forums; you've helped me out of some spots already.. on this one though i could use some help once again.. have had an 88 ranger xlt w/2.9 and 4x4 that was given me (now i've learned why) and that i've worked on and off to get back running again after sitting about ten years... of course it ended up with the need to do a complete rebuild of the engine and now that i've got that done i'm ready to put things together and put it back in... my 'problem' is that i was an idiot in going through the remaining parts in the gasket set when the engine came back from our machine shop and didn't recognize what the one large metal bushing was for; so of course i set it to the side and now that i do know what it is for i can't find it!! grr... my fault though... it is the bushing that mounts inside the flywheel and that the clutch pilot bearing sits inside of... darn close to 1 1/8" od x 5/8" id.... anyone know just what the name is for this part and where might be a good place to look for another one... my thanks in advance... much appreciated...