will those fit a 99? i'm pretty sure my passenger side is twisted the screw is all the way in while the other one is all the way out and still sits stock any one no how this could have happened and or how to fix it? just bought the truck so don't know much of its history
Yes, they will fit...theyre all interchangable. Its hard to say what that truck has been through, but being only an 05 I doubt theyre worn. If your looking for lift, get the #1 bars, be advised they ride stiffer too.
My B bars that came on my 01 were gone by the end of '07. Replaced them with #1 bars and those are about gone too as they're sagging but still do their job.
Only place to get replacement new bars is from your local Ford dealer. They are VIN# based...meaning you can't just ask for #1 torsion bars for a 04 Ranger....they'll ask for a vin# to see the build code of the truck and get you the bars that came on that vin#.
The problem you describe: passenger side all the way in and the driverside all the way out???? TOTALLY OPPOSITE should be happening. And it's totally normal because there's more weight on the driverside and the adjustment bolts are the same length. Totally normal is driverside in alot deeper than the passenger side.