Torque Spec. for vin X

[mothertrucker]

Does anyone know the recommended torque for the fuel rail to lower intake on a 1999 ranger 4.0?

My chiltons manual lists varied settings for other engines but this application is not even listed for the vin X model. I wonder if the Haynes manual is the same.

Thanks in advance.

 

[Kona]

Dont have my Haynes with me but yes it has the torque values.

 

[mothertrucker]

Chilton's has most basic torque applications listed, but they left out this application on this engine. The fuel supply to lower intake torque spec is listed for several other engine models, but not the 4.0. Most of them say 7-10 lbs per sq. in. So I pulled them down at 9lbs and continued assembly. Please let me know if I guessed close to what Haynes says. If I'm too far off, I will back-track and get it right.

Thanks

 

[Mike828]

11 lb-ft according to Ford workshop manual.

 

[UrbanRedneckKid]

FYI...
TRS has an awesome tech library, link is at the top of every page on the site...

Anyways, here's what your looking for,
http://www.therangerstation.com/tech_library/4_0_Page.html