BrockB
New Member
- Joined
- Nov 24, 2018
- Messages
- 8
- Reaction score
- 0
- Points
- 0
- Location
- Indiana
- Vehicle Year
- 1990
- Make / Model
- Single Cab Rang
- Transmission
- Manual
Recently after having stalling issues with my 2.3 I blindly changed my fuel pump and filter thinking that would fix it. Once the safety switch for fuel was plugged in and the lines primed (no leaks) the truck fired up and ran for 10-15 minutes. I was in the garage monitoring it while cleaning up. After about 15 minute it sputtered and stalled out but i heard something spinning from around the top of the engine when it was just turned off. Once the engine was off i heard a dripping sound but found none under the. I let it sit for awhile and tried to start it again and it fired on a few cylinders then backfired so hard it blew my muffler up. I stopped after that and have not touch the truck since... Any suggestions or help would be greatly appeciated if i didnt kill this enginw
Thanks for reading, My mechanical knowledge isnt great but im learning quickly
Thanks for reading, My mechanical knowledge isnt great but im learning quickly