Rex2nr
New Member
- Joined
- Aug 16, 2015
- Messages
- 79
- Reaction score
- 1
- Points
- 0
- Location
- Rochester, NY
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
New issue sprung up today- my tach and speedometer both started bouncing. My truck (99 xlt 4x4 w/4wabs) was down for the last week for a rear-most crossmember replacement. This is the one under the cab. I had the box off, and welded plates on the rear of the frame, and replaced the tire carrier with a spiderweb of tubing. I did disconnect the battery when welding.
My abs light has been on, but i havent been able to catch anyone at autozone who realizes one of their scanners does indeed read abs codes. I had been curious of the rear abs sensor, but i dont think that alone would cause the tach to bounce also.
Any hints on where to start? I already checked wiring from the cab back and it all looks to be undisturbed. I found a sensor on amazon that i will order tomorrow also, but i didnt have a chance tonight to test it. For 9 bucks, its not a big waste to just order....
My abs light has been on, but i havent been able to catch anyone at autozone who realizes one of their scanners does indeed read abs codes. I had been curious of the rear abs sensor, but i dont think that alone would cause the tach to bounce also.
Any hints on where to start? I already checked wiring from the cab back and it all looks to be undisturbed. I found a sensor on amazon that i will order tomorrow also, but i didnt have a chance tonight to test it. For 9 bucks, its not a big waste to just order....