Free SOCAL pickup FREEBIES!!!

[BrownRangers]

Free, six pack or toss me a few bucks but come and get it and put it to use

1984 2.8 v6 no a/c have Steel radiator, didn't leak removed for upgrade fins in good shape honeslty
1983-1988 tan doors, one is straight one has small dimple no mirrors and drilled for the larger mirror setup.
1988 v6 2wd trans cross member and frame mounts and part of the frame rails I cut off a donor truck
KYB gas adjust shocks
rear leaf spring spacers /bump stop perches
Working power steering pump fits 1984 2.8 v6 check rockauto for what other years could fit
I have some misc suspension,engine and other parts from 2.8 v6 stuff you can have
Can did thru my ranger bins of stuff for sale and see if there anything you want, some free, some cost you some dollars

Message me here and can workout details.

Burbank, CA location

 

[BrownRangers]

Anyone?? Bumpity
Check out my other ad of things for sale also.

Thank you.

 

[Eddo Rogue]

I am a stones throw from Burbank. Got anything for '93 4.0?

I could use a new rear bumper.

 

[BrownRangers]

I have the chrome diamond plate bumper that is on my truck 1984. I am putting a roll pan on it that I have just not installed. I alos have a set of stock height 95-97 beams and radius arms so you could do the front brake/knuckle upgrade. I have some front kyb shocks with about 5k on them, just check on rockauto to see if they are compatible. I also have a for sale post on here with bunches of items. Some brand new P/s lines and bunch of other little things.

 

[Eddo Rogue]

I have the chrome diamond plate bumper that is on my truck 1984. I am putting a roll pan on it that I have just not installed. I alos have a set of stock height 95-97 beams and radius arms so you could do the front brake/knuckle upgrade. I have some front kyb shocks with about 5k on them, just check on rockauto to see if they are compatible. I also have a for sale post on here with bunches of items. Some brand new P/s lines and bunch of other little things.

I can swing by with some cash/beer and see what you got. If that bumper will fit my truck with slight mods or bracketry fabrication, I'll take it.

Trying to avoid building a bumper with schedule 40 rigging pipe. Could probably use the knuckle parts too, the front end in general needs love....you will see when I drive her over.

PM me your number and will message you for details.

 

[BrownRangers]

DM sent