ruff stuff "Y" Link Steering Using GM 1 Ton TRE

[Divh]

Has anyone used the "Y" Link Steering Using GM 1 Ton TRE kit from ruffstuff and if so how did you like it any complaints i thinking getting it for my 93 ranger when i lift it vs getting skyjackers 6'' lift pitman arm

 

[bobbywalter]

i like it.


what are your intentions?

 

[Hagan]

That only works for solid axles not ttb.

I like mine. Works good.

 

[bobbywalter]

That only works for solid axles not ttb.

I like mine. Works good.

why you say that? you can mod it to fit a ttb depending on intentions and needs.

but it is not ideal for ttb, there will be fitment and handling tradeoffs.


the pic in here are imilar to that with my truck.


http://www.therangerstation.com/forums/showthread.php?t=95268&page=4

 

[Divh]

i figured i would have to mod it to work with the ttb and i going for something that wont limit my flex and will handle on and off road well any other good options out there and tnak you for responding

 

[4x4junkie]

Do a search for the linkage Stonecrusher was making for awhile. Several reports were it didn't fully cure bumpsteer (though it did alleviate the issues with excessive tire wear).

IMO, a K-link style setup (modified Superlift, etc.) has more to offer than anything else except maybe on a long-travel prerunner suspension (in which case you want to use a crossover or swingset style linkage).

 

[Divh]

thanks think i will go with a custom k-link style set up