• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Redline


Zer0PSI

New Member
Joined
Sep 21, 2007
Messages
110
Reaction score
4
Points
0
Location
Johnson City, TN
Vehicle Year
1994
Make / Model
Ford
Engine Size
2.3
Transmission
Manual
What is the redline on a 94' 2.3?? It's seems to be winding pretty hard at about 4,500, but that seems kind of low.
 


Dave R

New Member
Joined
Aug 6, 2007
Messages
658
Reaction score
2
Points
0
Location
In the snow belt
Vehicle Year
1953
Make / Model
Kaiser
Transmission
Manual
6250 (+/-)

Is it running out of breath at 4500 or falling on it's face? (i.e. does the power plateu or drop after that)
 

4b316

New Member
Joined
Aug 19, 2007
Messages
588
Reaction score
4
Points
0
Vehicle Year
1995
Make / Model
ford
Transmission
Manual
rpm,s

A stock 94 will turn about 6200 before it hits a rev limiter,then it will start fluddering and knocks out a cyl.It will not make any more power with a stock cam after 5600.We have the race truck geared to run 5700 lap after lap.Our truck finished 2nd in points this year,behind a S10 again.
 

Zer0PSI

New Member
Joined
Sep 21, 2007
Messages
110
Reaction score
4
Points
0
Location
Johnson City, TN
Vehicle Year
1994
Make / Model
Ford
Engine Size
2.3
Transmission
Manual
It's seems to lose power after about 4500RPM, that seems kind of low considering it's supposed to make peak power at 4600RPM
 

Zer0PSI

New Member
Joined
Sep 21, 2007
Messages
110
Reaction score
4
Points
0
Location
Johnson City, TN
Vehicle Year
1994
Make / Model
Ford
Engine Size
2.3
Transmission
Manual
It feels like it is making no power after about 45-4600, and sounds like it is going to blow
 

4b316

New Member
Joined
Aug 19, 2007
Messages
588
Reaction score
4
Points
0
Vehicle Year
1995
Make / Model
ford
Transmission
Manual
Don't beleive it will"blow".we have ran our "stock" 2.3 7200 quite a few times after putting in a chip that removed rev limiter but was not making anymore power up there so went back to stock,dropped the gear and run it at 5600.a couple of the guys with carbs and dist.are turning 7500 with stock cranks and pistons,I've heard 8400 on a few occasions but no proof of that.Most guys are running 5 inch memory tachs and are getting a good reading.Go to www.adirondackspeedway.com and look at some of the trucks.Our truck is #5 this year
 

rlarge15

New Member
Joined
Aug 6, 2007
Messages
7
Reaction score
0
Points
0
what about a 92, 4 cyl eight spark plug? What is the red line, does it have a rev limiter too?
 

4b316

New Member
Joined
Aug 19, 2007
Messages
588
Reaction score
4
Points
0
Vehicle Year
1995
Make / Model
ford
Transmission
Manual
same engine
 

Rocky Ranger

New Member
Joined
Sep 24, 2007
Messages
111
Reaction score
0
Points
0
Location
Sacramento
Vehicle Year
1995
Make / Model
Ranger
Engine Size
2.3
Transmission
Manual
It's seems to lose power after about 4500RPM, that seems kind of low considering it's supposed to make peak power at 4600RPM
Try hooking up your EGR valve:thefinger:
 

Mutant Pony

Active Member
V8 Engine Swap
Solid Axle Swap
Joined
Aug 6, 2007
Messages
1,753
Reaction score
9
Points
38
Age
58
Location
Hersey, Mi
Vehicle Year
1977
Make / Model
Ford
Engine Size
2300
Transmission
Manual
The block and crank can handle 9000 Rpm +. The stock rods and pistons won't handle much over 7000. I've bumped past 8000 a couple of times but, I don't depend on mine to get me to work on monday.
 

4b316

New Member
Joined
Aug 19, 2007
Messages
588
Reaction score
4
Points
0
Vehicle Year
1995
Make / Model
ford
Transmission
Manual
Couple guys at the track that run 2.3 mustangs,when they hurt their good motor that they run at 8500-9000,will just put a stock one in and a different head,will still turn them 8000 till they get their good one back together.A good,balanced bottom end will run 8000 lap after lap.Granted they are not staying up there,just hitting it at the ends of the straights,then letting off.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top