Plan on doing Body mounts/bushings...

[Jraymer360]

i plan on doing the body mounts as 3 of them are pretty much gone. one is still on..yay. gonna have to do a core support for the front to as the mount up there is missing

If i get these ( http://www.summitracing.com/parts/ptp-6-106) What hardware from here do i need to get ( http://www.lmctruck.com/icatalog/fr/full.aspx?Page=31)

Should i just grab everything but the "cushion" on the LMC truck page?

 

[UrbanRedneckKid]

I just did mine, during my cab swap.
I reused all the washer bushings, so no money there. I got that exact cab mount set at Advance for around $40. And you can get a new core support under $50 shipped on eBay.

Those pieces from LMC sure would have made it a lot easier though... I torched off all the nuts from the washers, then reassembled it with 1/2" G5 bolts.

Sent from my PG86100 using Tapatalk 2

 

[PanamaExpat]

I bought that same kit but have not mated the cab and chassis yet. Are you planning to add some body lift while you are doing it?

 

[chrwilkins30]

And you can get a new core support under $50 shipped on eBay.

I haven't seen them for $100

 

[Jraymer360]

No body lift, not in the budget and I don't plan on going to a taller tire. My body mounts are gone, I don't think I can save any of the hardware. Thanks for the advance idea.