Need Bronco II rear wiper arm

[jmaynard]

Mine's stiff enough and weak enough that the blade doesn't press against the window. They appear to be made of unobtainium. Any suggestions on where I can get one, or how I can fix mine?

 

[adsm08]

You could always measure it out and try to find one of a similar length and mounting method.

Sometimes TRS members who are nice guys and need an excuse to make a JY trip are willing to go looking in yards around them and then ship parts to people.

 

[jmaynard]

I found an '89 Bronco II in the junkyard I visited yesterday...but the arm was long gone. The guy there said that they're pretty much the first things to get stripped off of Bronco IIs and S-10 Blazers.

...but anyone who can locate one will have my undying gratitude for getting it to me...

 

[Little X]

I just pulled mine off of my explorer today. I don't know how well it works, the motor was broken when I got the truck. But, if they are the same part I'll send it to you for the cost of shipping + 1 or 2 $ for my time/box/tape, etc.

 

[Little X]

Like I said, I don't know if the parts are interchangeable, I'll let you figure that out. But, if they are and you want it you need to let me know cus it's getting scrapped on Tuesday.

 

[adsm08]

I'm heading to the yard tomorrow. PM me if you want me to look for one.

While I'm there I'll try to find out if the arms are interchangeable with the explorer.

 

[adsm08]

Mine's stiff enough and weak enough that the blade doesn't press against the window. They appear to be made of unobtainium. Any suggestions on where I can get one, or how I can fix mine?

I have managed to obtain a small amount of unobtainium and fashioned several rear wiper arms for your B2. I can send you one for $15 + shipping from 17701.

The explorer arm is too different. It mounts slightly differently and is too long. I don't think it would work.

 

[xr75er]

I picked 2 today form the jy. one is for an 89 and the other is for a 84-85 if you atill need one let me know. same price as other gent + ship. from Colorado

 

[Little X]

The explorer arm is too different. It mounts slightly differently and is too long. I don't think it would work.

Thanks for checking, mine is now being scrapped.

 

[adsm08]

now there is another RBV that uses the same arm...

 

[jmaynard]

I have managed to obtain a small amount of unobtainium and fashioned several rear wiper arms for your B2. I can send you one for $15 + shipping from 17701.

I picked 2 today form the jy. one is for an 89 and the other is for a 84-85 if you atill need one let me know. same price as other gent + ship. from Colorado

PMs coming.

 

[ChefKeith]

I am also looking for the rear wiper arm for my 89 B2.... I'll pay the 15 + shipping to 85367.... Yuma Az.
I have an old arm but it won't stay on? the clip thats supposed to hold it seems to be missing? If anyone has a close up of the spline end opening
that might help.
Keith

 

[ChefKeith]

J Maynard I'll take the one from 89 if you still have it?
Keith