- Joined
- Jan 14, 2024
- Messages
- 34
- Reaction score
- 20
- Points
- 8
- Location
- Gdl, Mexico
- Vehicle Year
- 1988
- Make / Model
- Ford Ranger XLT
- Engine Type
- 2.3 (4 Cylinder)
- Transmission
- Manual
- 2WD / 4WD
- 2WD
Hello, everyone.
My brake pedal sounds airy and mushy. The first few centimeters of movement it does not work but after that, it brakes just fine.
The front and rear brakes are new, and the hoses and the master cylinder is too.
When the engine is off the brakes work twice or so and then they become hard so I don’t think the booster is damaged.
I bleed the lines already, but perhaps I made it bad and that’s the problem?
Does anybody have an idea what the issue might be? Thanks
My brake pedal sounds airy and mushy. The first few centimeters of movement it does not work but after that, it brakes just fine.
The front and rear brakes are new, and the hoses and the master cylinder is too.
When the engine is off the brakes work twice or so and then they become hard so I don’t think the booster is damaged.
I bleed the lines already, but perhaps I made it bad and that’s the problem?
Does anybody have an idea what the issue might be? Thanks
Last edited: