Looking for a 3/4 lowering kit. I want to do it right

[Ryan Timmons]

Can anyone give me advice on a 3/4 lowering kit

 

[Uncle Gump]

I have zero experience in lowering these trucks... but the tech section has some information for you to have a look at.

Mini Truckin - Lowering Suspensions - The Ranger Station

DISCLAIMER: Activities and vehicle modifications appearing or described at The Ranger Station and it’s pages may be potentially dangerous. We do not endorse any such activity for others or recommend it to any particular person – we simply describe … Continued

www.therangerstation.com

Consider dropping in on the introduction page and telling us a bit about yourself and sharing a picture of your truck.

Welcome to TRS...

 

[stmitch]

Assuming it's for the 90 in your avatar, this DJM kit is how I'd spend my money:

1989-1997 Ford Ranger Complete 3 inch Front / 4 inch Rear Lowering Kit

1989 – 1997 Ford Ranger Complete 3 inch Front / 4 inch Rear Lowering Kit Lowered 3 inch I-Beams in the front and a simple rear axle leaf spring flip kit for a 4 inch drop in the rear. Shocks are NOT included. DJM Recommends: Front Shock 1415 (sold each) Rear Shock 1900 (sold each)…

djmsuspension.com

If you want o be able to align it properly, dream beams are the only option. You can get that low by cutting coil springs, but that sucks and you wouldn't be able to align the truck afterwards. You can do a 4" drop in the rear with Belltech leaf springs, but those impact hauling/towing ability and they're expensive. A drop kit is cheap and won't impact any loading capabilities.