- Joined
- Jan 13, 2019
- Messages
- 1,378
- Reaction score
- 806
- Points
- 113
- Location
- Pennsylvania
- Vehicle Year
- 2004
- Make / Model
- Ford
- Engine Type
- 3.0 V6
- Engine Size
- 3.0
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
- My credo
- My world is filled with stuff that needs to be fixed
I'm doing inner (and outer) tie rod ends. I got Motorcraft inners with the new boot. I stopped by Harbor Freight and picked up the tool. The instructions say to use hand force only, but there is a 1/2" square hole in the end. I'm worried about putting too much force on the rack - should I use an impact or a ratchet or not?
When installing should I use Loctite red or blue?
I also picked up a cheap vise grip to modify into a clic hose clamp tool:
It should work a couple times anyway.
When installing should I use Loctite red or blue?
I also picked up a cheap vise grip to modify into a clic hose clamp tool:
It should work a couple times anyway.