Mat88
New Member
- Joined
- Feb 15, 2020
- Messages
- 12
- Reaction score
- 2
- Points
- 3
- Location
- Québec, Canada
- Vehicle Year
- 1988
- Make / Model
- FORD Ranger
- Transmission
- Automatic
Hi guys! I found a m50d-r1 for my swap but i measure the tranny and the automatic is +/- 4" longer than the manual...
My question is... someone knows the lenght of the driveshaft on a manual 2.3 ranger 1988 with a 114 WB. 2WD.
The tube on mine is 50.5" weld to weld...
I measure the driveshaft on my crown vic and weld to weld is 54"
I am looking to install a nice aluminium cvpi driveshaft with a two size joint in the front...
Thanks for helping me!
My question is... someone knows the lenght of the driveshaft on a manual 2.3 ranger 1988 with a 114 WB. 2WD.
The tube on mine is 50.5" weld to weld...
I measure the driveshaft on my crown vic and weld to weld is 54"
I am looking to install a nice aluminium cvpi driveshaft with a two size joint in the front...
Thanks for helping me!