Dennis Hudson
New Member
- Joined
- Oct 22, 2019
- Messages
- 22
- Reaction score
- 2
- Points
- 3
- Location
- Vancouver
- Vehicle Year
- 83
- Make / Model
- Ford Ranger
- Transmission
- Manual
Still tracking down the bugs on my 83 2.3 lima. Confused about crankcase ventilation. There is a unit that pushes into the crankcase drivers side. I think it is a separator. I routed this to a pcv valve and then to my catchcan and then to the aircleaner.
I just put a small air filter on the valve cover, but now see that oil and air are coming out of it. This cant be right.
The engine is a 2.3, completely rebuilt, with a weber and msd ignition.
I've tried to make everything as simple as possible , so all the original vacuume lines , environmental stuff is gone.
Need some advise on proper ventilation routing...
Thanks everyone for all your help. Couldn't have got this far without the Ranger Station
I just put a small air filter on the valve cover, but now see that oil and air are coming out of it. This cant be right.
The engine is a 2.3, completely rebuilt, with a weber and msd ignition.
I've tried to make everything as simple as possible , so all the original vacuume lines , environmental stuff is gone.
Need some advise on proper ventilation routing...
Thanks everyone for all your help. Couldn't have got this far without the Ranger Station