Body mount hardware?

[Shran]

No problem. I should also mention that at a minimum, nylock nuts should be used or preferably steel lock if available. Absolutely no lock washers and normal nuts.

I have used this combination on multiple trucks over the years with zero issues. I feel that the factory style bushings are designed the way they are to ease in assembly at the factory, and really for no other reason.

 

[85_Ranger4x4]

The tube your talking about it the metal pipe like spacer that goes in between the polyurethane mount itself right

And just one washer per mount?

I basically recreated the stock stuff. Big washer top and bottom with a tube in the middle.

 

[MikeG]

Cool, you even got it to look rusty like the originals

 

[ElectraRider]

Ace is the place, they carry fine thread bolts, at least in Colorado Springs they do.