body lift

[sloth69mustang]

do they make a 2 inch body lift for 97s? trs only sells 3 inch. and i would rather just have 2 inch. i am trying to keep the center gravity down a little bit but i need the 2 inches to clear a possible 347 swap in the future and/or 36s.

 

[wrecking-crew]

You can look search on google for it or see if 4wheelparts.com has them.

 

[sloth69mustang]

yeah i looked before and didnt have much luck. maybe i will buy the 3 inch and cut it down? hahahaha idk if thats even possible.

 

[wrecking-crew]

Look on Performance Accessories website or on James Duff. Those are the last two places I'd look before making one work.

 

[sloth69mustang]

checked those too. no good.

 

[superds]

You can piece together a kit. Summit sells just the individual blocks (2", 3", or 1") and get hardware at a local hardware store.

 

[chrwilkins30]

You can piece together a kit. Summit sells just the individual blocks (2", 3", or 1") and get hardware at a local hardware store.

Yes do this. Alot cheaper then buying a kit

 

[straycat]

checked those too. no good.

Here, Bro. Give me rep power for helping you out. I have bought a 2 inch bl for one of my Rangers and one of my BII's before.

http://www.suspensionconnection.com/cgi-bin/suscon/body_lifts.html

 

[sloth69mustang]

Here, Bro. Give me rep power for helping you out. I have bought a 2 inch bl for one of my Rangers and one of my BII's before.

http://www.suspensionconnection.com/cgi-bin/suscon/body_lifts.html

thanks for the link but they only had 3" for 97.

 

[sloth69mustang]

Yes do this. Alot cheaper then buying a kit

well i have a manual so i need the extension piece will be needed for my transmission.

 

[superds]

Are you sure the extension will be needed? Or could you just have a shifter that will be 2" lower?

 

[superds]

For example, this kit doesn't include a shifter extension:

http://www.performanceaccessories.com/details.php?Application=Ford&Part_Number=752&Title=FORD BRONCO II&Active=Yes&Category=Body Lift Kits

It's for a 1984-1988 Ford Bronco II.

They do sell the shifter extensions seperately, part 3700: http://www.performanceaccessories.com/applications.php?Application=Ford&Category=Shift Extensions&Active=Yes Extensions&Active=Yes

 

[nine-teen91stxranger]

for the shifter, just take a piece of pipe with a threaded hole and make it as long as you want and set it in place, put a set screw in tapped hole, and put shifter knob on the top