- Joined
- Feb 16, 2010
- Messages
- 198
- Reaction score
- 0
- Points
- 0
- Location
- Spanaway, WA
- Vehicle Year
- 1988
- Make / Model
- Ford
- Engine Size
- 2.9L
- Transmission
- Manual
So, I am doing a cheap budget build until I can afford to straight axle my b2. I have the stock front springs with 1" spacers and the rear is all stock. I ordered the BellTech 6400 shackles today and noticed they give about 2 inches of lift at the bottom hole and about 1" at the 2nd to last hole.
My question is if I did go the full 2" in the rear, could i put my explorer front springs back in the front with the 1" spacer to have adequate height? I have no drop brackets and have never installed the explorer springs so I have no idea how much lift I'm looking at getting with them. Any help is appreciated. Thanks!
AJ
My question is if I did go the full 2" in the rear, could i put my explorer front springs back in the front with the 1" spacer to have adequate height? I have no drop brackets and have never installed the explorer springs so I have no idea how much lift I'm looking at getting with them. Any help is appreciated. Thanks!
AJ