87 ragner 10" lift 37's turbo coupe motor

[96RedRanger]

Here is my junk,
87 ranger i got for free, i did a turbo coupe swap
it has the stock 7.5 and dana 28
i dont do any hard wheeling, mostly dirt trails.
I know my axle are going to break with 37's so dont tell me.
I plan on breaking them, and then doing a d44 or d60 swap.
i made the front bumper and i think it will be a pretty cool truck when done
nuff said. here are pics

 

[Turboford]

Mirror build to what I'm doing, cept mine is an 88 long bed. That and I'm still finishing up my turbo swap. I'll be keeping an eye on this thread

 

[96RedRanger]

well if you need any help on it i can provide my links for the wiring, show you how i did the exhaust, etc

 

[96RedRanger]

I found a dana 44 and 9" from a 79 f150 today for 400, 1 ton axles maybe?

 

[Turboford]

Ive got a D44/9" from a 78 bronco. Plan on running 16/38-15 tsl's on em. half tons should be fine, IMO. I believe (@ least my engine) the tc engine I about 150 hp and 190-ish ft/lbs (???) so I doubt you'll have (m)any catastrophic failures.

 

[jhammel85]

Looks pretty good! It looks fun to drive

 

[Bennybooster]

I would go tons, stock tons vs. built 1/2tons the tons win every time in price and strength.... plus you can build the crap outta tons if ya wanna go really big