- Joined
- Aug 23, 2015
- Messages
- 389
- Reaction score
- 87
- Points
- 28
- Location
- Virginia
- Vehicle Year
- 1988
- Make / Model
- Ford
- Engine Type
- 2.9 V6
- Engine Size
- 2.9
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- Total Lift
- 0
- Total Drop
- 0
- Tire Size
- 235/75/15
Alright in this picture, the following leads are hot when dash switch is on Tank B. The inertia switch and the rear tank pump. (Pink w/ Black Stripe and Brown w/ White Stripe)
When I switch to Tank A the following leads are hot. Tank A Pump (Red).
Should there be any other leads hot during between Tank A/B and what should they be? It appears the sending unit and the pump ground are shared. Where is exactly do they meet and ground... on the frame?
When I switch to Tank A the following leads are hot. Tank A Pump (Red).
Should there be any other leads hot during between Tank A/B and what should they be? It appears the sending unit and the pump ground are shared. Where is exactly do they meet and ground... on the frame?
Attachments
-
80.2 KB Views: 90