Essex85
New Member
- Joined
- Mar 29, 2008
- Messages
- 9
- Reaction score
- 0
- Points
- 0
- Age
- 38
Hello all,
I have a real quick question. I've rebuilt a stock 351w for my 87 Ranger, and I have two transmission options. I could put a C6 that I have in there, or a WC T5.
Now for my question, would the T5 be strong enough to handle the torque out of a stock 351w. If it would be, I know that I will need to do some fabrication to get the master/slave to work together perhaps these parts:
Slave Cylinder
Master Cylinder
Thanks!
I have a real quick question. I've rebuilt a stock 351w for my 87 Ranger, and I have two transmission options. I could put a C6 that I have in there, or a WC T5.
Now for my question, would the T5 be strong enough to handle the torque out of a stock 351w. If it would be, I know that I will need to do some fabrication to get the master/slave to work together perhaps these parts:
Slave Cylinder
Master Cylinder
Thanks!