3.0l guy here looking to be pointed the right way

[00rangerde]

hey every one im lookign for like a list of the fastest 3.0l or dyno test guys have done is there such a post on this or do i have to look thorw every ones post like 10000 pages lol( i want to see stock, na bolt ons and boost dyno numers and 1/4)

also any one know that guy that did the 1.7 roller rockers and amde 20 more hp its on one of the ranger forums
i also joined rps with the smae user names thanks

 

[Froggmann]

Do a search. Punctuation please, that is very difficult to read.

As far as I know Morana is the only one selling 1.7RR's.

 

[TxGasRacer]

http://www.therangerstation.com/tech_library/3_0performance.shtml

 

[stmitch]

Honestly, your best bet is to just "google" whatever info you're trying to find ie: "ranger whipple time slip", or "ranger 3.0 dyno" etc. You're not going to find all of the info you want in one spot. Very few 3.0 owners mess with performance stuff, and even fewer bother to do dyno tests, etc.

Dragtimes.com will have some examples for you about 1/4 mile times. Personally, my mostly stock truck with an auto trans ran 17.2 in the 1/4. Haven't made it to the track or the dyno since I've put the fun motor/manual trans in it. I'll probably get around to it eventually.

Some of the whipple guys have dyno'd their trucks in the past, but the results vary a lot depending on other modifications, and who was doing the tuning. There is a sticky in the 3.0 forced induction section on RPS where several guys have posetd dyno numbers that will give you an idea of what to expect.

 

[JP02XLT]

It also depends on the dyno your testing on as well, as to what HP you put down, I have a truck that put down 556 on one dyno and then 578 on another, air temps and humidity were similar and the truck was up to temp before the pulls, and nothing was changed on the truck, all the pulls were ran max wheel speed, held in 3rd gear.

No it was not the Ranger, never had it on the rollers, yet.

JP02XLT