2.9 Starter Bolts

[Mhfco6]

Anyone know what size the starter mounting bolts are? Are they the same size as all the other motor to trans mounting bolts? They are missing on my project, someone took off starter and the bolts are awol.

 

[lil_Blue_Ford]

Don’t remember offhand, but I know they are metric

 

[Mhfco6]

Don’t remember offhand, but I know they are metric

Head will turn with 1/2” or 13mm just need the pitch and length. All the others have a shoulder as well.

 

[Josh B]

If nothing else get a handfull of bolts and start twisting until you find one that goes in easily and snugs down well

 

[Mhfco6]

If nothing else get a handfull of bolts and start twisting until you find one that goes in easily and snugs down well

Smaller Through bolt, with a nut

 

[Josh B]

Mine has one too

 

[lil_Blue_Ford]

Head will turn with 1/2” or 13mm just need the pitch and length. All the others have a shoulder as well.

If I had to guess, I’d say M12-1.75 and probably 40mm or so. If I get a chance I’ll poke under mine and see if I can get a better number. I could be incorrect.

 

[Mhfco6]

If I had to guess, I’d say M12-1.75 and probably 40mm or so. If I get a chance I’ll poke under mine and see if I can get a better number. I could be incorrect.

I picked some up today. M10x1.50 by 40 did the trick!

 

[Josh B]

I went by a local farm/ranch/hardware store recently and stocked up on different bolts, nuts and washers.
Figured if I ever used one of them it would pay for the trip.

 

[lil_Blue_Ford]

I picked some up today. M10x1.50 by 40 did the trick!

Well, at least I got the length right, lol