Amb1205
New Member
- Joined
- Aug 17, 2021
- Messages
- 16
- Reaction score
- 1
- Points
- 3
- Location
- Georgia
- Vehicle Year
- 1996
- Make / Model
- Ranger xlt
- Transmission
- Manual
I'm looking for some advice on repairing my egr issues I'm having, my intake port where egr is mounted is plugged up with carbon and I'm wanting to removed intake to thoroughly clean out and reinstall. Has anyone done this repair before and if so is there a walkthrough or step by step procedure I could look at before starting? And what parts are needed for reinstall such as seals and what not. Also torque specs for intake would be helpful. Tia