redneck2012
New Member
- Joined
- Sep 3, 2012
- Messages
- 20
- Reaction score
- 0
- Points
- 0
- Location
- Pacific Wa
- Vehicle Year
- 1992
- Make / Model
- FORD
- Engine Size
- 4.0
- Transmission
- Manual
i got a 92 ranger with a 3.0 5spd 2x4 just got the truck from my buddy he did the engine swap and had no clue what he was doing and when i got it from him he said he replace the ignition module and that was it, i found one harness connector that was not fully plugged in and one ground that was not hooked up but the problem is i have no spark and dont think the injectors are firing.
i had reset the timing on it but setting it to tdc on the crank by no 1 plug up and set the dizzy to no 1 but no fire
would like to get this truck running so i can use it or sell it
any thing helps please
i had reset the timing on it but setting it to tdc on the crank by no 1 plug up and set the dizzy to no 1 but no fire
would like to get this truck running so i can use it or sell it
any thing helps please