Alaska Diesel
Member
- Joined
- Sep 22, 2019
- Messages
- 52
- Reaction score
- 8
- Points
- 8
- Location
- Palmer Ak
- Vehicle Year
- 1986, 1987
- Make / Model
- Ford Ranger
- Engine Type
- 2.9 V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
Does 86 have a PCV valve?
Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Yes, it should.Does 86 have a PCV valve?
OK thank youI hope someone will correct me here if I'm wrong but I believe that's not quite right - the injectors are disabled ONLY when cranking the engine and ONLY if the throttle is wide open, it doesn't have anything to do with the WOT relay. All fuel injected trucks have the "clear flooded engine" mode.
That's great news, what exactly is the HAC sensor though? I have not heard of that acronym in the Ranger world before.I've figured out what was wrong with my ranger!!!!!!!!!!!!!
It was the HAC sensor. I'll upload a picture later.
I had noticed the top was broken off, but since it was broken off before so I thought it wouldn't be that.