wiring

Hey peeps, I just took the cover of the steering column, and i don't see the ignition harness. I'm tryin to install a Remote Starter. I unpluged every connector there and the truck still starts, and i don't see anymore wires, what am i missing? Can someone point me in the right direction in...

hello i have a 1989 ranger that has no radio or radio wires i want to try and put one in does anyone have a wiring diagram for the peakers and radio? the plug is till there but there are no wires to the speaker?

Alright guys, I have absolutely no idea about what the hell is going on with the truck lately. About 2 1/2 months ago, I started the truck up and went for a drive down the street. Everything was fine until I looked down, the speedometer's dead. I went home, checked the VSS and replaced it. The...

Hey everyone, so as the title says.. I have an 86 B2, and I've been trying to hook up a newer panasonic CD player in lieu of the stock cassette am/fm. First I'd like to know which wire in the truck goes to the Yellow constant 12v+ on the stereo. And then which wire goes to the Red switched...

I got a JVC Arsenal KD a615 from my brother for christmas (As well as a set of speakers, but the main ones don't quite fit into the door and I have no tweeter spots), spent many hours trying to translate the wiring from the new wiring of the stereo to the wires in my truck. I got the speaker...

im swapping an 84 5.0 into a 89 xlt ranger if posted this before but i havent understood the answers fully. i need everything how to wire all the electric engine components (not sensors) like the ignition starter voltage regulator and the alternator an indepth picture or explanaion would be...

im swapping a 84 5.0 carb motor into an 89 ranger and im trying to retain the stock fuel sytem. I need to know what the wires are coming out of the top of the sending unit and how to wire them to a relay? Can i use the stock lines and then run 1/4" lines to the regulator at the quick...

im using a explorer hd radiator what hoses d use for an 84 5.0 swap into an 89 ranger? any ideas/pics of a hydralic clutch assembly for a t5? what type of throtle cable can be used fr the carb swap? does anyone know how to wire the alternator and voltage rgulator from the 84 5.0 intote pickup...

HELP !! I'm swaping from my 89 Bronco II 2.9 to a 93 Explorer 4.0. Can anyone help me with the wiring change ?? You can e-mail me at dapatt2002@yahoo.com

i need help with wiring my 89 ranger which im currently in the middle off swapping an 84 carb 5.0 im using an msd 6200 ignition module. i need to know where i hook the the small red wire up to the ranger so i can start it up thanks:icon_confused:

i have an 89 ranger xlt that im currently swapping a 84 5.0 carb mustang motor into it has a duraspark II ignition sytem and i need help wiring it all up so any help would be great but i need from the key to the ignition module, starter solienoid ect.. the whole deal thanks...

Hi, i have a 2009 ranger sport 4.0L and i recently installed a set of PIAA 510 driving lamps, i have every thing hooked up exept for the "switch power" wire, i had it run directly to the battery and they work, but i would prefer that it be wired so it gets power when i turn the ignition on, any...

I got an old 84 Ranger off my cousin it had been sitting up a while in his back yard (I think about two years) it still had the factory radio and no one had done any work on it in a while. It looks surprisingly similar to the January 2010 Street Truck of the Month :icon_thumby: (Even the same...