SOHC 4.0 thermostat housing upgrade

[morsetaper2]

My thermostat housing leak is not that big. As some days it leaks a little, other days it doesn't. But the way I understand it is only going to get worse.

 

[sgtsandman]

Simmons alum thermo hsg arrived yesterday. I need to get the tensioners, and some other parts in before I get started on all of this.

Kinda looks like w/ thermo hsg removed, as it needs replaced, the frt/driver side tensioner really isn't bad to do? Do I have that right?

It gives you a good deal more room. The intake manifold is the biggest obsticle, if you still have it on the engine when you go to install the tensioners.

 

[morsetaper2]

So reading about tensioners and ordering up parts, I see that some tensioners come w/ a white nylon rod. An "Oil Pressure Restrictor Rod".

Digging into this Cloyes video about rebuilding the entire timing & tensioning system it is mentioned and shown shortly after they install the front tensioner. FF the youtube to 10: 45 in, the rod is pulled out shortly thereafter.

Haven't heard or read any talk about this piece? What does it actually do? And can you get it out to clean it and its port with the intake manifold still in place?

 

[sgtsandman]

I do not remember anything about a rod. Cleaning out the port in the head that feeds the tensioner, yes. But nothing about a plastic rod. I'm not saying there isn't one, I just don't remember seeing one.

 

[Saddle Tramp]

I have a question about changing the one on the passenger side, behind the wheel wll cover. When you take out the old one, does a lot of oil drain out?

 

[01WHTRNGR]

So reading about tensioners and ordering up parts, I see that some tensioners come w/ a white nylon rod. An "Oil Pressure Restrictor Rod".

Digging into this Cloyes video about rebuilding the entire timing & tensioning system it is mentioned and shown shortly after they install the front tensioner. FF the youtube to 10: 45 in, the rod is pulled out shortly thereafter.

Haven't heard or read any talk about this piece? What does it actually do? And can you get it out to clean it and its port with the intake manifold still in place?

I just noticed my kit also comes with that rod. Haven’t seen anything about it anywhere else.

 

[sgtsandman]

I have a question about changing the one on the passenger side, behind the wheel wll cover. When you take out the old one, does a lot of oil drain out?

I don't remember ther being much oil coming out at all. Most of the oil drains back into the oil pan after the engine has been shut down and been allowed to sit for a while. There is a little trapped in the tensioner, but not much.

 

[Saddle Tramp]

Nice!