1.	This symbol is for what type of weld?
	Groove Weld   Fillet Weld   Angle Weld   V Weld

2.	This symbol is for what type of weld?
	Plug Weld   All Around Weld   Square Weld   Box Weld

3.	This symbol is for what type of weld?
	Field Weld   Circle Weld   All Around Weld   Avoid This Area

4.	This symbol means?
	Do not weld this area   Use Caution   Field Weld

5.	This symbol indicates that you need to:
	Weld on arrow side of joint   Weld on other side of joint

6.	This symbol indicates that you need to:
	Weld on arrow side of joint   Weld on other side of joint

7.	This symbol states that your weld should be:
	6 welds 1/4 inches long   1/4 inch weld 6 inches from the edges   1/4 inch weld that's 6 inches long

8.	This symbol states that your welds should be:
	1/4 inch welds that are 2 to 4 inches in length   1/4 inch weld that's 2 inches from one end and 4 inches from the other   Two 1/4 inch welds that are 4 inches apart   1/4 inch welds that are 2 inches long and have 4 inch spacing

9.	This symbol indicates a:
	Groove weld   Fillet weld contoured with a grinder   Weld gap

10.	These symbols represent what type of welds?
	Curved Welds   Angled Welds   Gap Welds   Groove Welds

11.	I realize that....
	I know my symbols   I'm a lucky guesser!   I must be really bored for actually taking this   I should check this answer so I have one right!

12.	Surprise! Last question. This is a:
	Bevel Groove   V Groove   Notch Cut