swamprat
Member
- Joined
- Aug 12, 2007
- Messages
- 720
- Reaction score
- 3
- Points
- 18
- Location
- lexington KY
- Vehicle Year
- 1994
- Make / Model
- Ford
- Engine Type
- 4.0 V6
- Engine Size
- 4.0
- Transmission
- Manual
- 2WD / 4WD
- 4WD
I had a leaky wheel cylinder on my ranger so I pulled it off and replaced it. While I was doing that I figure I might as well replace shoes. Got it all done and the drum is tight on the shoes. I backed off the adjustment screen and opened the bleeder and that helped some but still tight. Never have I had them this tight before. Should I just run it and see if it settles in?