Welcome Visitor! Please take a few seconds and 
- Joined
- Oct 25, 2015
- Messages
- 162
- Reaction score
- 7
- Points
- 18
- Location
- Bismarck ND
- Vehicle Year
- 1987
- Make / Model
- Ford
- Engine Type
- 4.0 V6
- Engine Size
- 4.0L OHV
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 4"
- Tire Size
- 32's
- My credo
- Break. Upgrade. Repeat.
I'm want to convert my 1987 B2 from the 2 speed wipers to delay wipers. I traded a guy for the switch and module, but I don't know how the harnesses are supposed to line up. As far as I know, the parts came off a 1987 B2, so I can't imagine why they would be compatible. One side of the module plugs into the harness that used to go directly to the switch, but I can't figure out where the other side of the module plugs in. Can anyone point me in the right direction?
Here's a picture of the harness and the switch:
https://drive.google.com/open?id=1a7T2IXSQplLPLvs_2gz58c-MH7vsPJkK
Thanks.
- Joe
Here's a picture of the harness and the switch:
https://drive.google.com/open?id=1a7T2IXSQplLPLvs_2gz58c-MH7vsPJkK
Thanks.
- Joe
