Shran
Junk Collector
TRS Forum Moderator
Supporting Member
Article Contributor
V8 Engine Swap
Solid Axle Swap
Truck of Month
- Joined
- Mar 4, 2008
- Messages
- 8,700
- Reaction score
- 4,800
- Points
- 113
- Location
- Rapid City SD
- Engine Type
- V8
- Engine Size
- 5.0
I bought a truck that does not have a rear driveshaft and I am hoping someone has the exact truck I have and can take a picture of your rear driveshaft and post it here. That way I can determine what I need to order.
My truck is an '88 Ranger, Custom trim, 2.3, 5 speed manual M5OD, 4x4, shortbox.
I need to know specifically if your driveshaft has a CV (double cardan) joint at the t-case end, and if it attaches with BOLTS or STRAPS or U-bolts. Again, a picture would be very helpful.
I have a fixed yoke on the t-case that looks like this:
and the standard flange yoke on the axle, like this:
My truck is an '88 Ranger, Custom trim, 2.3, 5 speed manual M5OD, 4x4, shortbox.
I need to know specifically if your driveshaft has a CV (double cardan) joint at the t-case end, and if it attaches with BOLTS or STRAPS or U-bolts. Again, a picture would be very helpful.
I have a fixed yoke on the t-case that looks like this:
and the standard flange yoke on the axle, like this: