RumpRanger98
New Member
- Joined
- Feb 19, 2009
- Messages
- 292
- Reaction score
- 2
- Points
- 0
- Location
- Tacoma, WA
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- V6 3.0L
- Transmission
- Manual
So this is my first ford. and I have a coolant hose thats leaking. ive never seen hose designs like this. I have a return set, and an outgoing set. two 5/8" hose going to the firewall into the cab (one is going one is return) and halfway to the firewall they both have a black "T" that branches a smaller hose that goes to the upper intake manifold, one return, one going.
I don't know which one is which, but I do know what one is leaking.
My question is.... Does this come as a single item, the 3 hoses and "T"? or can I rip the hose out of the T and shove a new hose in?
yellow arrow points to specific hose I want to replace
red outline is the 5/8" hose with the pastic T and the 1/4" hose branching off of it to the IM
99 3.0 ranger
I don't know which one is which, but I do know what one is leaking.
My question is.... Does this come as a single item, the 3 hoses and "T"? or can I rip the hose out of the T and shove a new hose in?
yellow arrow points to specific hose I want to replace
red outline is the 5/8" hose with the pastic T and the 1/4" hose branching off of it to the IM
99 3.0 ranger
Last edited: